How do you cut straight with a Sawzall?

You can ensure a clean and straight cut with your reciprocating saw on a plank or a board by using clamps to lock down a fence rail along the edge of the work you are cutting. Use c-clamps to hold the piece your cutting securely to a surface and get a running straight edge and clamp this down into the desired position.

Cutting concrete with a reciprocating saw begins with safety gear. Cutting concrete creates dust and sends sharp shards of material flying toward the tool operator. Because concrete dust can cause respiratory discomfort or damage, reciprocal saw operators must wear face masks or respirators.

Additionally, can you cut plywood with a reciprocating saw? Yes, you can cut wood with a reciprocating saw, along with a wide variety of materials. You can cut through plywood and plyboard with no problem using just a general purpose blade with your tool. You can also cut dimensional lumber and studs, too, along with the nails and screws.

Herein, how thick can a reciprocating saw cut?

Reciprocating saw blades range from 3 – 12-inches long. Keep in mind, the longer the blade, the deeper the cut. Wider blades reduce bending and wobbling. Heavy duty blades tend to be 7/8-inches wide and 0.062-inches thick.

Can you cut 2×4 with reciprocating saw?

Reciprocating saws cut through just about everything short of a rock. With a recip saw (also called a Sawzall, the brand name of Milwaukee’s tool), you can cut through lumber even if it’s embedded with nails.

What is a reciprocating saw used for?

A reciprocating saw is a popular tool used by many window fitters, construction workers and emergency rescue services. Variants and accessories are available for specialized uses, such as clamps and long blades for cutting large pipe. Blades are available for a variety of materials and uses.

Are reciprocating saws dangerous?

Reciprocating saws can cut through wood, metal, and all sorts of construction materials. But they can also be dangerous and need to be handled with the utmost care. One of the main hazards of recip saws is their potential for kickback.

What’s the difference between a reciprocating saw and a Sawzall?

The Sawzall is a reciprocating saw. Over time, the term “Sawzall” has been used to mean any reciprocating saw of any manufacturer. Milwaukee also has a line of reciprocating called HACKZALLS. It’s easy to see why Sawzall is used to refer to any reciprocating saw.

What will cut hardened steel?

If a clean cut is desired when cutting through hardened steel, or if the steel’s hardness must be retained, a fine toothed hacksaw will work wonderfully, though the process is long and will require a great deal of intense effort. Use a bench vise to firmly hold the hardened steel as it is cut.

Why is it called a reciprocating saw?

A reciprocating saw isn’t used as a fine crafting tool. It’s a workhorse that gets its name from the short, back-and-forth cutting stroke of the blade. The blade is exposed so you can direct it into tight spaces.

Are reciprocating saws any good?

The reciprocating saw makes one of the best saws for pruning tree limbs or cutting small trees. You can actually use a standard reciprocating saw blade to cut tree branches, but a reciprocating saw will only work as good as the blade that is intended for a specific project – like a pruning blade.

How thick of steel can a Sawzall cut?

Our best performing, longest lasting metal cutting sawzall blade is the Morse Master Cobalt 9” . 050 thickness 14 TPI (teeth per inch) that cuts mild steel, stainless steel, and aluminum.

Can a Sawzall cut hardened steel?

What is the Best Sawzall Blade for Hardened Steel? Carbide tipped blades cut harder, denser metals like hardened steel, cast iron, alloys including boron steel, and higher grades of stainless steel. Diamond Grit blades also cut hardened steel, however they are expensive and take longer to cut through the material.

Can you use a reciprocating saw to cut branches?

Joe Truini: A reciprocating saw is one of the most versatile power tools you can own. It can cut virtually any building material. But it’s also great for trimming tree branches. Now you can use a standard reciprocating saw blade to cut tree branches, but you’ll get much better results if you use a pruning blade.

Can you use a Sawzall to cut drywall?

You can cut safely into existing drywall using a special dull small blade that fits into a reciprocating saw. It’s far better to use a new short metal blade has been developed for electric-powered reciprocating saws that’s designed specifically to cut holes into existing drywall.