How much does it cost to fix a throttle?

The average cost for a throttle body replacement is between $577 and $691. Labor costs are estimated between $92 and $117 while parts are priced between $485 and $574. Estimate does not include taxes and fees. When would you like to drop off your car?

To replace your car’s throttle body, you will pay as little as $370 or as much as $1,500. Labor should be between $70 and $260, and parts should cost you from $110 to $600.

Likewise, how much does a throttle body cleaning cost? RepairPal.com suggests that a throttle body cleaning costs between $226 and $290. What’s interesting to note is the price of parts: $6 to $12, the low estimate of which is about twice the cost of a can of CRC Throttle Body Cleaner at your average auto parts store.

Regarding this, how much does it cost to fix electronic throttle control?

Throttle Body Labor and Part Costs Brand new, quality aftermarket replacement throttle bodies for most mainstream vehicles are between $100 and $200. Prices go up from there for OEM replacements.

Can you drive with a bad throttle body?

If you have a bad throttle position sensor, your car will not perform well or safely. Driving with a bad throttle position sensor may also cause problems in other related systems in your car, which will mean additional repair bills.

How do I reset my electronic throttle control manually?

Turn the ignition switch on and wait 3 seconds. Immediately after the 3 seconds, the accelerator pedal must be pressed and released 5 times within 5 seconds. Wait 7 seconds and fully press the accelerator pedal and hold for approximately 20 seconds until the check engine light stops blinking and stays on.

Do you have to program a throttle position sensor?

Code errors can cause your throttle position sensor to work erratically or incorrectly. Otherwise, you’ll need professional software to reprogram your sensor. This job is best done by a professional mechanic. If your sensor just needs repairs, it could be the result of faulty or loose wiring.

How do you program a throttle body?

step 1: Accelerator Pedal Release Position Learning (0:15) Do not depress the accelerator pedal. Turn the key to the ON position for atleast 2 seconds. Turn the key to the OFF position for 10 seconds. Turn the key to the ON position for 2 seconds. Turn the key to the OFF position for 10 seconds.

Does the throttle body need to be replaced?

The throttle body plays a large role in controlling the fuel and air mixture in your engine. The proper mixture needs to be achieved in order for your engine to run smoothly and properly. Once this part fails, it needs replacing rather than repairing.

What causes the throttle body to fail?

Vacuum leaks or an incorrectly adjusted throttle stop Vacuum leaks can disrupt the air/fuel flow due to an imbalance of air flow which can cause throttle body pressure problems. This is a component that acts as a gate-keeper and establishes a minimum or maximum position for a throttle body plate to be opened or closed.

Does cleaning throttle body make a difference?

In summary, you can clean the throttle body all you like, but the fact is, if your engine is worn, your intake and throttle body will continue to get dirty. Cleaning your throttle body likely won’t do anything to solve an idle problem. It might make you feel better, but it might do little to solve an idle problem.

How often does a throttle body need to be replaced?

30,000 miles

How do I reset my electronic throttle control?

Accelerator Pedal Release Position Learning Procedure. Make sure that the accelerator pedal is fully released. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds.

What does the lightning bolt on my jeep mean?

The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Slowly depress the accelerator pedal all the way to the floor. Slowly release the accelerator pedal until it is all the way back up at the rest position.

What happens when the electronic throttle control goes bad?

Throttle hesitation or problems accelerating In some cases a damaged throttle controller will cause the engine to have issues with acceleration or cause a “stumbling” effect when the throttle is engaged by the driver.

What causes the throttle light to come on?

The system cannot function when something disrupts the signal such as an issue with the relay control, a loose electrical wire, or a damaged sensor. In any case, the throttle control will lose signals, causing it to work properly at some times and not at others.

Where is the throttle position sensor located?

Throttle Position Sensor (TPS) Repair Guide Fig. The Throttle Position (TP) Sensor is located on the rear of the intake manifold. The Throttle Position (TP) Sensor is located on the bulkhead, above the accelerator pedal. The Throttle Position (TP) Sensor is located on the bulkhead, above the accelerator pedal.