What is grease gun used for?

A grease gun is a common workshop and garage tool used for lubrication. The purpose of the grease gun is to apply lubricant through an aperture to a specific point, usually on a grease fitting or ‘nipple’.

The lever is used in manual configurations of the grease gun for hand-pumping the grease from the barrel to the hose or tube. The air-release nipple allows air to escape after new grease has been added to the grease gun and pumped into the head. The spring provides the pressure onto the plunger.

Beside above, what grease gun is best? A Look at our Favorite Products in 2020

Model Price Editor Rating
DEWALT DCGG570B 18V Cordless (Best Overall) Check Price 4.8/5
Alemite 555-E Pistol Check Price 4.6/5
Drake Off Road 1134 (Best Value) Check Price 4.5/5
Lumax LX-1152 Check Price 4.3/5

Additionally, how do you use a manual grease gun?

Steps

  1. Remove the head of the gun from its barrel.
  2. Pull the rod handle back.
  3. Lock the rod handle.
  4. Open the new grease cartridge.
  5. Insert the new grease cartridge into the barrel of the gun.
  6. Note the pull-tag on the end of the new cartridge.

What is the best grease gun?

Top 10 Best Grease Guns

  1. Dewalt DCGG571M1 20V MAX Cordless Grease Gun.
  2. Lincoln 1162 Air Operated Grease Gun.
  3. Lumax LX-1152 Heavy Duty Deluxe with 18″ Flex Hose.
  4. Milwaukee 2646-20 M18 2-Spd Grease Gun Bare Tool.
  5. Lincoln Lubrication 1844 Cordless Grease Gun.
  6. Astro 101 Mini Grease Gun.

How many shots of grease are in a tube?

Answer: Generally, a shot of grease means one stroke from the grease gun. However, the output, or amount of lubricant dispensed from a grease gun depends on the model. Grease guns deliver widely varying amounts of grease (typically 0.1 ounce or 2 to 3 grams).

How many cc’s are in a pump of grease gun?

The G. Gun grease gun dispenses a theoretical 3cc per stroke. Our tests confirm the actual volume dispensed is 2.7cc/stroke.

How do you put grease in a grease gun?

How to Load a Grease Gun The head needs to be packed with grease. The plunger is usually dry in a new grease gun. Remove both ends of the grease cartridge. With the t-handle out, place the cartridge into the barrel. Screw the barrel into the head of the gun. Push the t-handle right down into the barrel. Take out any possible air pockets.

What is the best grease for ball joints?

5 Best Grease for Ball Joints: Lucas Oil 10301 Heavy Duty Grease, 14.5 oz.: Best o the best: Lubrimatic 11404 Marine Wheel Bearing Grease: Editors Top Choice: Valvoline SynPower Automotive Wheel Bearing Grease: The cheapest one: Timken GR224C Wheel Bearing Grease: Significantly great for versatility:

How much PSI does a grease gun have?

A high-pressure grease gun delivers pressure up to 15,000 psi. Most bearing seals will rarely handle more than 500 psi.

Does Walmart sell grease guns?

Grease Guns – Walmart.com.

How do you use Zerk grease?

How to Use a Grease Gun Zerk Fitting Purchase a grease gun with a zerk fitting on the end of it. Press the end of the grease gun on the end of the zerk fitting. Pump the grease gun. Stop pumping when you see grease squeeze out the edges of the ball joint. Pull the grease gun off of the ball joint and repeat this process until all ball joints are greased.

Why does my grease gun not work?

Issue: The grease gun won’t pump grease. The most common cause is an air lock. This can be fixed by continuously pumping to see if the air will pump out. Secondly by unscrewing the barrel one turn and continuously pumping, then tightening the barrel when the grease pumps.

Who invented the grease gun?

George Hyde

What is a Zerk fitting?

A grease fitting, grease nipple, Zerk fitting, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, into a bearing under moderate to high pressure using a grease gun.

Can you use wd40 on guns?

WD40 is a great product. Its also great for guns when used correctly. Never soak your guns in anything without removing the excess, especially WD40. On the exterior metal parts, WD40 will do a great job.