What size excavator Do I need to remove stumps?

A 315 Cat or 160 size excavator would work good for what you want to do. If you were going to be clearing good-sized hardwood stumps you would want a 200 size machine. An excavator works great clearing stumps because after you dig the stump out you can shake it to help get most of the dirt out of it.

A mattock is a hand tool similar to a pickaxe, with a head that generally includes either two cutting blades or one cutting blade and a pick. The tool is designed for digging and cutting through roots, which you’ll need to do in order to remove any stump from the ground.

Similarly, what is the fastest way to remove a tree stump? Steps

  1. Dig around the roots. Use a shovel to dig next to the stump, exposing the roots underneath the surrounding dirt.
  2. Cut up the roots. Depending on the size of the roots, use loppers or a root saw to cut them into pieces.
  3. Pull out the roots.
  4. Remove the stump.
  5. Fill in the hole.

Subsequently, question is, will a mini digger remove tree stumps?

Physical Removal Again, smaller trees can be dug out by hand or with a minidigger, which is likely to take a little longer but has the advantage of removing the majority of the roots too. A stump grinding machine is a practical option of larger tree stumps.

How do you remove a stump without a stump grinder?


  1. Use a chain saw or bow saw to cut the stump down as close to the ground as you can, without allowing the chain saw’s teeth to strike the ground (this will dull your chain).
  2. Drill holes a few inches deep into the stump in numerous places, using the biggest, widest drill bit you have.

How much does it cost to remove a tree stump?

The average cost to remove a tree stump ranges from $60 to $350 per stump, depending on various factors like size. The average removal cost breaks down to approximately $2 to $3 per diameter of the stump. If you do it yourself, it may only cost you about $75 to $150.

How does Epsom salt remove a tree stump?

Drill holes into the top of the stump, using a 1-inch extra-long bit. Make holes all around the stump, leaving a few inches between them. Pour straight, dry Epsom salt into the holes to fill them. Water the holes slowly to be sure that the salt doesn’t come back out.

How do you get rid of a large tree stump?

Removing a Stump by Grinding it Away Yourself Use a shovel or mattock to clear rocks away from around the stump. Cut away as much of the stump as possible with a chainsaw. Using the hydraulic lever, raise the grinder wheel a couple of inches above the stump.

How do you rot a tree stump?

Most tree stump killer brands are made of powdered potassium nitrate, which speeds up the rotting process. You simply pour the granules into drilled holes and fill the holes with water. The stump will become pretty spongy after four to six weeks. Keep kids and pets away.

How do you use a stump?

DIRECTIONS FOR USE Then into the side of the stump, about 4 to 5 inches down from the top, drill a 1-inch wide hole slanting downward toward the bottom of each vertical hole. The two hole ends should meet. It is important to drill the side holes slanting downward so the liquid to be poured into the holes won’t run out.

How do you remove a stump from a chainsaw?

For those of you who fall into that category; this is the Quick Version of how to remove a tree stump with a chainsaw. Get your personal protective equipment on (yes all of it) Cut the tree stump down to the ground level. Dig the dirt from around the stump exposing the roots. Cut the roots. Pry the stump from the ground.

How do you grub a stump?

If you choose to grub, or dig out, your stump, there’s a few basic rules to follow. First, dig a trench one to two feet out from the circumference of your stump and several feet deep. Once you’ve done this, begin working under the stump, severing roots and freeing the stump for removal.

How do you dig up a stump with a backhoe?

Step 1: Get Your Backhoe in Position Position your compact tractor and backhoe so you can dig out the most material on three sides of the stump and deposit it as far away from the hole as possible without having to move the tractor. Lower the loader to the ground to help balance out the setup.

Can a bobcat remove tree stumps?

Bulldozer. A bobcat won’t do much with 24″ trees, and digging them out is a waste. A bulldozer will push them out if enough of the trunk is left standing and three feet of stump should do it. Forget about grinding as well, it will take entirely too long depending how many stumps you’re talking about.