Why is it called newel post?

noun obsolete A novelty; a new thing. noun (Arch.) The upright post about which the steps of a circular staircase wind; hence, in stairs having straight flights, the principal post at the foot of a staircase, or the secondary ones at the landings. Also called newel post.

Newel. It can also (usually as “newel post“) refer to an upright post that supports the handrail of a stair banister. In stairs having straight flights it is the principal post at the foot of the staircase, but the term can also be used for the intermediate posts on landings and at the top of a staircase.

Furthermore, is newel post structural? The newel post serves two very important functions. First and foremost, it is a structural element of the staircase. Since it is not always possible to fix one (or both) sides of a staircase to the wall, the newel post is the load-bearing element that supports that side.

In respect to this, what does a newel post do?

A newel post is the upright post that sits at the top and/or bottom of the balustrade to support a staircase banister and secure the balustrade. Newel posts don’t just give a balustrade structure and strength, they also offer the perfect opportunity to add a decorative touch to your stairway.

What is the difference between newel and baluster?

is that baluster is (architecture) a short column used in a group to support a rail, as commonly found on the side of a stairway; a banister while newel is (architecture) a sturdy pillar at the top or bottom of a flight of stairs, supporting the handrail.

What is the top of stairs called?

At the top of the stairs, the horizontal portion of the railing is called a “over easing”.

What is the flat part of stairs called?

The horizontal flat area at the top of the uppermost incline or flight of stairs. Also may be called the second floor or upper level.

What is the trim on the side of stairs called?

1 Answer. If it’s structural (the tread/risers are supported by it), it’s called a stringer. If it’s not structural, it’s called skirting (or simply a skirt).

How tall should a newel post be?

Typically floor level balustrades must be at least 36” high or 42” high, depending on local codes and stair guardrails must be between 34” and 38”.

What is the difference between a railing and a banister?

As nouns the difference between banister and railing is that banister is the handrail on the side of a staircase while railing is a fence or barrier consisting of one or more horizontal rails and vertical supports.

What is a newel drop?

Description. 1 11/16″ x 3″ Newel Drop – Woodstairs.com’s Newel Drops are decorative bottom feature that is used when Newel Posts extend below the landing. In such cases it may be necessary to order taller Newel Posts to achieve this additional length.

What is a newel cap?

Newel caps are an attractive addition to posts. The cap adds a finish to the newel post. In most cases the cap is manufactured from the same type of wood as the newel post but this is not a necessity. This in an inexpensive way to personalize a staircase.

What is the maximum distance between newel posts?

But if the balcony is eighteen feet, then it would require four newel posts as the distance between each post would be greater than eight feet if only three newel posts were used. Also, it is important to always check local building codes, as they may have additional requirements.

What is a spigot newel post?

Product Description. The solution square spigot newel posts measures 90mm x 90mm x 1000mm and have a peg on the bottom (50mm diameter, 80mm length) to attached to the existing post or newel base. These posts are available in pine, hemlock, oak, ash, southern yellow pine, sapele and walnut.

Are newel posts hollow?

Box newel posts are squared, hollow newel posts that are typically larger than the turned alternative. There is an infinite number of sizes and shapes based on this squared style, and they incorporate a huge variety of details to create unique designs.

What is a half newel post?

A half newel post cap is exactly that—a newel cap that’s been cut in half so it can fit on top of a half newel post. As with regular newel caps, half-size newel caps come in a range of designs so you can match the newel caps on your full-size newel posts. Popular styles include acorn, pyramid and ball half newel caps.

How far apart should decking newel posts be?

You need to screw the newel posts to the inside of the framework if you are using spindles then you want to be a bout 1.8m apart, if you are using ready made balustrade panels then about 1.2m.